44
7-2. In case that the X10 is NOT connected to any network(internet).
7-2-1. Ripping All
This procedure is for loading (ripping) CD by one task.
① Insert CD into X10.
② Select CD Play/Rip icon and press OK.
Track list is displayed like the screen below.
③ For loading (ripping), press MENU button.
The below screen is displayed.
【 TIP 】 Without network(internet) connection, the inserted
CD will get its metadata if you installed freeDB data(CD)
into X10 hard disk. The freeDB data(CD) is bundled in X10
package.
⑥ Enter info with remote controller or USB keyboard.
You must enter Album name to go to next step.
【 TIP ⑥ 】 To use USB keyboard, ensure to connect a USB
keyboard into the X10 before you boot the unit.
⑦ Select OK and confirm it. Then, loading(ripping) starts
like below picture.
④ Select Ripping All and confirm it with OK button.
⑤ Select one of four(4) options and confirm it with OK
button. The below screen will be shown.
To Next Page
Loading...
