CocktailAudio X10 - Network Setup; Wired Network Setup; DHCP (Auto IP) Setup; Static IP Setup

27
5-4. Network
※ Make sure your Ethernet cable or a USB WiFi dongle is connected.
Select Network and press OK button.
5-4-1. Wired Setup
5-4-1-1. DHCP(Auto IP)
5-4-1-2. Static IP
③ Select DHCP(Auto IP) and confirm it with OK button.
No need to enter any values.
④ Select OK and confirm it with OK button.
① Select Static IP and confirm it with OK button.
② Enter proper values like IP Address, Subnet mask, etc.
③ Select OK and confirm it with OK button
⑤ Left screen will be shown if network is connected
successfully.
① Select Network and confirm it with OK button.
② Select Wired Setup or Wireless Setup and confirm it with OK
button.
【 TIP 】 To check network information, press Network Info.
④ Left screen will be shown if network is connected
successfully.