34
5-6-5. HDD format
※ HDD Format function of X10 does not support multi-partitioning. If you want to make two(2)
partitions on the HDD, please do it with your computer.
5-6-5-1.Brand New HDD(not partitioned HDD)
① Install HDD into X10 and power it ON. ② Go to System of SETUP, and select HDD Format like
below picture. ③ Confirm it with OK key, then HDD Format screen will show up like below.
⑤Press OK key to start format process, then it starts(HDD unmounting ---Æ Partition Resetting --
Æ NTFS Formatting) like below pictures.
※X10 re-boots automatically after finishing HDD format.
5-6-5-2.Used HDD(partitioned HDD)
① Go to HDD Format of SETUP, and confirm it with OK button. ② HDD Info screen shows up like
below. ③ Press OK button for next step. ④ Select OK and confirm it with OK button. Then it
starts formatting process. Next procedure is the same as above.
[Warning] HDD format will have all data in the HDD lost completely !!!
To Next Page
Loading...
