26
【 TIP 】
※ The meaning of OFF(Headphone) : If a headphone is connected to X10, or an external
amplifier is connected to X10 through the Line Out connector, the amplifier inside of X10
is OFF.
※ The meaning of ON(Sub woofer) : Even though a headphone or an external amplifier is
connected to X10 through the headphone connector or the Line Out connector, the
amplifier inside of X10 is still ON.
※ What’s the difference between PCM2ch and Passthrough ?
PCM 2ch : You can control volume level with X10(its remote control)
Passthrough : X10 volume level is set as zero(0) DB and volume is NOT controlled by
X10. It should be controlled by the external device.
【 Caution 】 For changing setting to(from) SPDIF, you MUST stop playing first before SPDIF
setting.
5-3-4. Gapless Play
X10 supports gapless playback function for MP3 file, WAV and FLAC file only.
※ default is ON
【 TIP 】
※ LAME-encoded MP3 file only supported
※ Gapless play function works properly on ‘Repeat All’ and ‘Normal’ modes only. For
example, on ‘Shuffle’ mode, Gapless play does not make sense.
Set as Frequency 96Khz
z Volume controllable by X10’s remote control
z Audio output : 96Khz
To Next Page
Loading...
