45
7-2-2. Ripping Tracks
This procedure is almost same except the process for selecting track you want to load (rip).
7-3. In case that you installed FreeDB data into the hard disk of X10
If you installed FreeDB data into the hard disk of X10, it works just like that X10 is connected to
network(internet). X10 displays CD information from the FreeDB data installed into the hard disk.
7-4. Function to get information on the result of CD ripping and converting.
After ripping, go to the Music DB and place cursor on the Album. Press INFO button. You can see
the result of the CD ripping and file converting progress.
Now loading(ripping) !!!!!!
⑧ Loading (ripping) finished. Select OK and confirm it with
OK button. The below screen will be displayed.
⑨ If you did not enter info for title, artist, year or genre on
the previous step, you can enter all info here.
⑩ After entering info, select OK and confirm it with OK
button. All finished.
【 TIP 】 You can edit loaded CDs in Music DB of X10 easily
through WebInterface.
To Next Page
Loading...
