36
5-7. Firmware
You can check current firmware version and install updated new firmware.
Select Firmware and confirm it with OK key.
5-7-1. Current firmware
You can check current firmware version like below picture. Select Current Version and confirm it
with OK key.
5-7-2. Update by manual(Firmware update by manual)
① Obtain the new firmware first and put it into the root
directory of USB memory stick or the HDD of X10.
② Plug the USB memory stick into the USB host port of X10.
③ Go to SETUP and select Firmware Update and confirm it with
OK key.
④ Select the storage where you put new firmware.
⑤ Select xxxxxxxxxx.pkg file and confirm it with OK key
⑥ Left screen will show up. Press RETURN key to
exit this setup.
[ Note ] Auto shutdown does not work properly if
you set shutdown time as ‘within 3 minutes from
the time to power on.
To Next Page
Loading...
