EasyManua.ls Logo

Cocoon Skyview HE170642 - Taking Photos & Videos; Taking a Photo; Recording Video; Downloading Media to PC

Cocoon Skyview HE170642
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
1300 663 907
Model Number
HE17064
2
customercare@win
p
lus.com.au
After Sales Support
TAKING PHOTOS & VIDEOS
6.1 Taking a Photo
NOTE: Ensure you have inserted a MicroSD card into the camera and the data cable is plugged into the
corresponding plug near the Skyview HD Quadcopter’s on/off switch
To take a photo, press the photo button. The remote control will beep once, indicating
a photo has been taken
6.2 Recording a Video
NOTE: Ensure you have inserted a MicroSD card (Up to 32GB) into the camera and the data cable is
plugged into the corresponding plug near the Skyview HD Quadcopter’s on/off switch.
To take a video, hold down the photo/record button down for 3 seconds. The remote
control will beep once, indicating video is recording. To stop recording, press and hold
the record button again for 3 seconds until you hear the long beep indicating recording
has stopped
IMPORTANT NOTE: If you hear only a short beep, you have not started or stopped your video. Hold the
button for 3 seconds until you hear the long beep.
IMPROTANT NOTE: If both the green and blue LEDs begin flashing while you are flying with your Skyview
HD Quadcopter, this indicates the battery is running low. Land immediately on a level surface.
6.3 Downloading Photos and Videos onto your PC
a. Eject the MicroSD Card from your Skyview HD Quadcopter’s camera
b. Insert the MicroSD Card into a card reader (not included) and insert into your
computer
c. Copy images and videos to your computer like you would with any digital
camera or memory card
NOTE: Images are in JPG format and videos are AVI format
6.4 Mounting your Action Camera onto the Skyview HD Quadcopter
You can mount your GoPro®* camera or action camera (not included) onto the camera
adaptor included, using the various cases or mounts that came with your action camera
a. Connect your action camera to the included adaptor
b. Slide the adaptor with camera onto the quadcopter
c. Use your camera to record as per the manufacturer’s instructions
IMPORTANT NOTE: Damage to your action camera through incorrect use of the Skyview HD Quadcopter is
not covered by warranty. Ensure you are confident with the controls and flight before attaching your camera.
Depending on the weight of the camera attached, battery life per charge may be reduced