Codan Sentry-H 6110-MP User Manual

Making a 2G or 3G ALE call
Point-to-Point call
A point-to-point call is a general term used to describe a transmission between two radios. There
are several types of calls you can make using your radio. Refer to the call types (page 39) for more
information about the types of calls that are available.
navigation
indicator
call type
HF network
address
incoming
call
missed
call
outgoing
call
Stations/select HF Network/Async*
* ‘Async’ is for 3G ALE only
To start a 2G or 3G ALE call:
1. Press the key.
2. Select a call type using the and keys.
3. Enter the address of the station you are calling.
4. Press the key.
5. Enter a text message or select a menu item if prompted.
6. Press to begin the call.
Making a 2G or 3G ALE call
Sentry-H 6110-MP Operator Guide Page 43

Codan Sentry-H 6110-MP Specifications

General

Brand	Codan
Model	Sentry-H 6110-MP
Category	Radio
Language	English