Remote Start Shutdown Diagnostics
If the remote start shuts down or fails to start, the parking lights will flash one of the
patterns below indicating the shutdown input.
To
manually enter diagnostics and view the last shutdown, turn the ignition
ON
and
press and release the
._.
button.
LED
FLASHES
3 Flashes
4 Flashes
5 Flashes
7 Flashes
SHUTDOWN ZONE
Hood
Input
Brake
Input
Remote
Start Valet Mode
Manual Transmission Mode not set (manual
transmission models only)
Tach not learned
I
Crank Average not learned
2014 Voxx Electronics Corporation.
All
rights reserved.
27
To Next Page
Loading...
