EasyManua.ls Logo

Code Alarm PROFESSIONAL SERIES - Page 18

Code Alarm PROFESSIONAL SERIES
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
ca1155 rev B
4 - System Notications: This feature selects which output(s) will sound the
system’s arm/disarm chirps. This feature does not e󰀨ect the triggered state of the
security system and during a triggered cycle, both the siren and horn outputs will
activate respectively.
Siren & Horn – Siren and horn both sound when arming/disarming the system.
Siren Only – Only the siren will sound when arming/disarming the system.
Horn Only - Only the horn will sound when arming/disarming the system.
5 - Alarm Duration: Determines the length of time the system will sound the siren/
horn during a full trigger event.
30 Seconds – When triggered, the system will sound the siren/horn for 30
seconds then stop. The unit will remain armed and may be triggered again.
60 Seconds – When triggered, the system will sound the siren/horn for 60
seconds then stop. The unit will remain armed and may be triggered again.
6 - Security: Controls security functionality - ON / OFF.
ON - Full security functionality.
OFF - The security system does not trigger. Panic and all other convenience
features operate as normal.
ON w/OEM Remote Start Compatibility - This will prevent a vehicle’s factory
remote start from triggering the security system when activated. The system
will use the ignition input to shunt shock and door inputs until 5 seconds after
they clear. If the alarm is triggered prior to ignition on, then ignition will not
shunt/cancel the alarm’s triggered state. Also, note that the ignition input will no
longer serve as a trigger if this option is selected on.
7 - Anti-Hijack Mode: Controls Car Jack mode - ON / OFF.
OFF - Standard security system operation.
ON - Enables Car Jack mode functionality as described in the owners
manual
8 - Ground While Armed / Orange Output: Controls the output of the orange wire.
This wire will either supply a ( - ) output when armed OR disarmed.
9 - DBI Port Protocol: Determines the protocol type in which the DBI port uses to
interface with external modules.
DBI Protocol
ADS Protocol

Other manuals for Code Alarm PROFESSIONAL SERIES

Related product manuals