EasyManua.ls Logo

Code Alarm PROFESSIONAL SERIES - Page 19

Code Alarm PROFESSIONAL SERIES
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
2020 Voxx Electronics Corporation. All rights reserved.
10 - Arm/Disarm Chirps: Determines the number of chirps and parking light ashes
when the system is armed/disarmed.
Standard - 2 chirps/light ashes with arm, 1 chirp/light ash with disarm.
Inverted - 1 chirp/light ash with arm, 2 chirps/light ashes with disarm.
11 - LED Indicator: Control of the LED when the system is armed / locked.
ON - LED will ash when system is armed / locked
OFF – LED will not ash when system is armed / locked. Only applies to
normal operation (armed/locked) and does not a󰀨ect programming, valet
mode, diagnostics, passive lock countdown or PTN
12 - Auto Re-Lock: When Auto Re-lock is selected, the system will re-lock the
vehicle after 3 minutes if the system was disarmed and a door was NOT opened
within that set amount of time. A door opening within this time cancels Auto Re-Lock.
Note: This feature is separate from Passive/Active Arming
OFF – Standard operation.
Lock Only – The unit will re-lock the vehicle after 3 minutes if the system was
disarmed and a door was NOT opened within that time.
Arm & Lock (security units only) - The system will arm and also re-lock the
vehicle after 3 minutes if the system was disarmed and a door was NOT
opened within that time.
13 - Extended Parking Lights: When selected, this feature will keep the parking
lights on for an additional 30 seconds after the standard ashes when pressing lock
or unlock.
OFF – Normal parking light function.
After Unlock – Parking lights will stay on for 30 seconds after normal unlock
ashes.
After Lock - Parking lights will stay on for 30 seconds after normal lock ashes.
After Lock & Unlock - Parking lights will stay on for 30 seconds after normal
lock and unlock ashes.
14 - Parking Light Relay / Trunk ( - ) Output: This feature gives the installer the
ability to swap the functions of the Parking Light Relay & Trunk Output.
Standard – No change to outputs.
Inverted When inverted, the Trunk Red / White ( - ) Output will function as the
Parking Light Output and the Parking Light White & White/ Red will function as
the Trunk Output.
15 - Not available on this model.

Other manuals for Code Alarm PROFESSIONAL SERIES

Related product manuals