Code Blue CB 1 Series - CB 1-S Component Identification; Required Tools for Component ID; Component Location Diagram (Figure 1)

Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-157-AApage 52 of 76
CB 1 Series
Administrator Guide
CB 1-S COMPONENT NAMES & ENCLOSURE LOCATIONS
To assist with identifying the major electrical components of the CB 1-s free-standing pedestals,
callouts are depicted in the photo and mirrored illustration below.
REQUIRED TOOLS
• Zip ties (short & long assortment)
• Crimp on wire forks (18 gauge)
• Code Blue security bit & driver
• #2 Philips screwdriver
• 90° drill and drill bits
• Taps for #6 screws
• Digital volt meter
• Conduit punch
• Wire cutters
• 10-foot ladder
• Crimpers
Strobe or
Beacon/Strobe
70-watt Area Light
HPS or Metal Halide
Phone Faceplate
Light Bar
Faceplate
(connected to
speakerphone
electronics)
Power Panel
Transformer or
Power Strip
Access Door
Fig. 1