Code Blue IA4100 - Page 31

page 31 of 45 GU-139-Z1
Command Explanation Format Default
Miscellaneous Programming
61
62
63
64
65
67
68
69
RFA Tone Delay from Answer
Preliminary Audio Delay
DTMF timing on
Pause time
DTMF dialing volume
Recording playback level
Ring count answer
Disable Backup Battery Check
61<Delay>
62<Delay>
63<DTMF on>#
64<Pause time>#
65<DTMF volume>#
67<playback level>#
68<ring>#
69<0 or 1>#
5#
9#
7#
7#
5#
5#
1*0#
0#
NOTES: FORMAT VALUE PARAMETERS
Command 61 = RFA Tone Delay from Answer
3 - 9 = 3/10 to 9/10 second
Command 62 = Preliminary Audio Delay
0 - 9 = 0/10 to 9/10 second from RFA beep to initial 2-way audio
Command 63 = DTMF on time: 1 - 9
1 - 3 = 100 - 300 milliseconds
4 - 9 = 40 - 90 milliseconds
Command 64 = Pause time: 1 - 9
1 - 3 = 100 - 300 milliseconds
4 - 9 = 40 - 90 milliseconds
Command 65 = DTMF volume: 1 - 9
1 - 9 = -8dB - +8dB
Command 67 = Playback level: 1 - 9
1 - 9 = -8dB - +8dB
Command 68 = Ring count answer
First digit, ring count = 1 - 9
Second digit, ringing sound: if the First Digit is greater than 1, then after * (asterisk
key) choose.
0 = NO ringing sound
1 = YES ringing sound
Command 69 = Disable Backup Battery Check
0 = NO
1 = YES
(Continued on next page)
IA4100
Administrator Guide
Code Blue
• 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com
Programming Commands (continued)