Victory 3_en.pdf http://en.codelight.com.cn
9
3.2. Patch Selected Type
The function allows you to patch more same type fixtures you have selected without search from the fixtures pool
again.
3.3. Unpatch
You can select and delete one or more consecutive patched fixtures by pressing option [Unpatch].
3.4. Repatch
The function allows you to change the address and/or the line of the patched fixtures.
1> Select the fixture need to be changed;
2> Press [Repatch];
3> Select the DMX line and start address on the menu by touch. Or you may change them by typing the line
and address number on the top bar;
4> Press [Confirm] to change the address and/or DMX line.
Note: Unit ID will not be changed after re-patched.
Typing in numbers
to change the line
and address
1
2
1
2
To Next Page
Loading...
Need help?
Display
Power
Weight and Dimensions
