What to do if spigot head is not properly fixed in my Coldelite UC 511 G?
If the spigot head is not properly fixed in your Coldelite Freezer, check the spigot head itself. Also, inspect the magnet in the spigot head and the reed switch.
What to do if thermal sensor is out of order in my Coldelite UC 511 G Freezer?
If the thermal sensor is out of order in your Coldelite Freezer, replace the probe. In an emergency, you can bypass the probe.
Guidelines for placing the freezer in its operational location, including clearance and leveling.
Details on power supply, wiring, grounding, and fuse requirements for safe operation.
Details on the digital display, buttons, and indicators on the control panel.
Information about the internal electric control panel and safety precautions.
Covers various other control components like solenoid valves and pressure cut-outs.
Instructions for reassembling the beater and auger components.
Detailed steps for putting together the dispensing head assembly.
Key maintenance tasks including O-ring care, cleaning, lubrication, and part replacement.
To Next Page
General
