Cole Parmer POLYSTAT - Wetted Materials

Section 2 General Information
2-4
Cole Palmer
Wetted Materials
Immersion Circulators
Viton
EPDM
Ryton
Ultem
Vectra
Stainless Steel
• Cole Palmer reserves the right to change specications without notice.
Stainless Steel Baths/Circulators
Stainless Steel 316
Stainless Steel 304
EPDM (drain tting)
Ryton
Zotek-N (cover seal)
Transparent Acrylic Baths/Circulators
Poly-acryl
Polyphenylene oxide (PPO) Baths/
Circulators
Polyphenylenoxid
*Lower temperature ranges available with supplemental cooling.
**Add ~2.4 mm to D for drain
Polyphenylene oxide (PPO) Baths/Circulators with Controller 1
W5P W14P W21P
Temperature Range* Ambient +10 to 100°C
Ambient +50 to 212°F
Ambient +10 to 100°C
Ambient +50 to 212°F
Ambient +10 to 100°C
Ambient +50 to 212°F
Bath Volume liters
gallons
3 - 5
0.8 - 1.3
8 - 14
2.1 - 3.7
13 - 21
3.4 - 5.5
Dimensions (H x W x D) mm
inches
346.9 x 190.5 x 452.0
13.7 x 7.5 x 1.8
347.9 x 358.1 x 452.0
13.7 x 14.1 x 17.8
347.9 x 358.1 x 642.6
13.7 x 14.1 x 25.3
Net Weight kg
lb
4.6
10.1
6.3
13.8
7.1
15.6
Transparent Acrylic Baths/Circulators with Controller 1
W6A W12A W19A
Temperature Range* Ambient +10 to 80°C
Ambient +50 to 176°F
Ambient +10 to 80°C
Ambient +50 to 176°F
Ambient +10 to 80°C
Ambient +50 to 176°F
Bath Volume liters
gallons
4 - 6
1.1 - 1.6
8 - 12
2.1 - 3.2
12 - 19
3.2- 5.0
Dimensions (H x W x D) mm
inches
336.9 x 188.8 x 407
13.3 x 7.4 x 16
338.9 x 352.8 x 348**
13.3 x 13.9 x 13.7
338.9 x 352.8 x 526**
13.3 x 13.9x 20.7
Net Weight kg
lb
5.2
11.4
7.1
15.6
8.2
18.1