4-1
Cole Palmer
The Cole Palmer Immersion Circulators have a digital display and easy-to-use
touch pad, ve programmable setpoint temperatures, acoustic and optical
alarms and adjustable high temperature protection.
Section 4 Operation
Controller
Use this button to place the unit in and out of standby.
Use these navigation arrows to move through the controller displays and to
adjust values.
Use this button to start/stop the unit. This button is also used to make and
save changes on the controller's display screen.
Use this button to cancel any changes and to return the controller to its previ-
ous display. Canceling a change can only be made before the change is saved.
In some cases, it is also used to save changes.
NOTE Holding this button for ve seconds resets the display contrast to the
default level and also brings up the language menu to change, if needed, the
displayed language. See Settings - Display Options in this Section.
Use the adjacent dial for adjusting the High Temperature Cutout. Details are
explained in Section 6.
To Next Page
Loading...
Need help?
General
