• Insert the inclination Rod through the hole in the front of the treadmill. Then lower the front so the
treadmill rests on the Downhill Adapter feet and the Inclination Rod
• Tighten all remaining screws and nuts of the legs and braces.
This completes the assembly of the Downhill Adapter.
2.2.3 Air-Puff Stimulus
The Air-Puff Stimulus includes the following:
1 x ¼in diameter air supply line with quick-connect fittings, 6m (20ft)
1 x Air Reservoir 19 liter (5 gallon)
1 x ½” diameter air supply line. 2.4m (8ft)
1 x Molex Mini-Fit Jr valve power cable, 2m (6ft), 2-circuit, plug-plug
You may also need the following tools/supplies:
To Next Page
Loading...
