28
On consignment of the machine
When the machine is consigned to the customer, an immediate
check must be performed to ensure all the material mentioned
in the shipping documents have been received and moreover to
find out that the machine has not suffered damage during
transportation. If damage has occurred, get the shipping agent
to verify immediately the amount and nature of the damage
suffered and at the same time inform our claim department. It is
only by prompt action of this type that compensation for
damage may be successfully claimed.
Introductory comment
This is a floor cleaning machine which, using the mechanic
abrasive action of two rotary brushes and the chemical action of
a solution water-detergent, is able to clean any type of floor,
picking up during its advance movement, the removed dirt and
the detergent solution which has not been absorbed from the
floor.
The machine must be used only for such purpose. We would
impress upon you that any machine will function efficiently and
operate successfully, only if used correctly and maintained in
fully efficient working order. We therefore suggest you to read
this instruction booklet carefully and re-read it whenever
difficulties arise in the course of machine use. Our Service
Department is at your disposal for all such advice and servicing
as may prove necessary
.
TECHNICAL DATA U.M.
OMNIA26 OMNIA32 OMNIA42
Cleaning width mm
660 830 1040
Squeegee width mm
1015 1115 1315
Working capacity, up to sqm/h
2640 3320 4160
Brushes ∅ mm
345 430 533
Brushes rpm rpm
220 210 170
Max. brushes pressure kg
80 80 80
Max. specific pressure on the brushes g/sqcm
57 36 33
Tension brushes motor V
36 36 36
Power brushes motor W
1250 1250 1500
Tension traction motor V
36 36 36
Power traction motor W
300 450 450
Type of drive
aut. aut. aut.
Movement speed km/h
0÷40÷40÷4
Max gradient
10% 10% 10%
Tension suction motor V
36 36 36
Power suction motor W
560 560 560
Suction vacuum mbar
190 190 190
Capacity solution tank l
75 105 105
Capacity recovery tank l
85 115 115
Machine length mm
1600 1650 1750
Machine height mm
1120 1120 1120
Machine width (without squeegee) mm
700 850 760
Battery compartment mm 436x614xH510
Batteries V/Ah
36/285 36/285 36/285
Batteries weight kg
305 305 305
Machine weight (empty and without batteries) kg
205 240 290
Acoustic radiation pressure level (in conformity with IEC 704/1) dB (A)
<70 <70 <70
Vibration level m/sqs
1.72 1.72 1.72
To Next Page
Loading...
