ComAp InteliGen NTC BaseBox User Manual

IGS-NT Communication Guide
53
First steps
Start to using
How to Register (Become a User of the WebSupervisor) and Login?
You can start using WebSupervisor without installation any special software on your PC.
To start and login into WebSupervisor open www.websupervisor.net in your browser and follow the steps at
WebSupervisor.
More information about WebSupervisor you can get at:
www.websupervisor.net/download/WebSupervisor 4.0 - Global Guide.pdf
4.4 Web interface
The web interface is intended to monitor the controller from a web browser. Static IP address is required for this
function as you must know the IP address to put it into the browser. Public IP address or port forwarding is
required if you want to see the web pages from the Internet.

ComAp InteliGen NTC BaseBox Specifications

General

Brand	ComAp
Model	InteliGen NTC BaseBox
Category	Controller
Language	English