ComAp InteliLite MRS16 Global Guide

InteliLite Global Guide
247
Setpoint group General Analog Inputs Related FW 1.9.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 11411 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical binary output AIN SWITCH02 (PAGE 553) is configured
Description
Threshold level for switching the binary output AIN SWITCH 02 (PAGE 624) off. The value is measured from
AIN SWITCH 02 (PAGE 624) analog input.
Image 8.23 General analog input 2 switch
Analog Switch 2 Off
6 back to List of setpoints
General Analog Input 3
Setpoint group General Analog Inputs Related FW 1.9.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 9265 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical analog input AIN PROT03 (PAGE 606) is configured
Description
Warning or history threshold level for AIN PROT03 (PAGE 606).
Note: These setpoints are used only if LAI AIN PROT03 (PAGE 606) is adjusted to required protection
type. Otherwise these setpoints are useless.
Analog Protection 3 Wrn
6 back to List of setpoints

ComAp InteliLite MRS16 Specifications

General

Brand	ComAp
Model	InteliLite MRS16
Category	Controller
Language	English