ComAp InteliLite MRS16 Global Guide

InteliLite Global Guide
256
Setpoint group General Analog Inputs Related FW 1.9.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 14979 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical binary output AIN SWITCH04 (PAGE 554) is configured
Description
Threshold level for switching the binary output AIN SWITCH 05 (PAGE 625) off. The value is measured from
AIN SWITCH 05 (PAGE 625) analog input.
Image 8.29 General analog input 4 switch
Analog Switch 5 Off
6 back to List of setpoints
General Analog Input 6
Setpoint group General Analog Inputs Related FW 1.9.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 9274 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical analog input AIN PROT06 (PAGE 609) is configured
Description
Warning or history threshold level for AIN PROT06 (PAGE 609).
Note: These setpoints are used only if LAI AIN PROT06 (PAGE 609) is adjusted to required protection
type. Otherwise these setpoints are useless.
Analog Protection 6 Wrn
6 back to List of setpoints

ComAp InteliLite MRS16 Specifications

General

Brand	ComAp
Model	InteliLite MRS16
Category	Controller
Language	English