InteliLite Global Guide
57
Controller Address (page 183) has to be set to the same value as in the PC tool
IP Address Mode (page 378) can be set to AUTOMATIC when there is DHCP service is available.
Otherwise it needs to be set to FIXED
IP Address (page 378) is either set automatically or it can be adjusted to a specific requested value
Subnet Mask (page 379) is either set automatically or it can be adjusted to a specific requested
Gateway IP (page 379) can be set here when it is used
AirGate Connection (page 383) has to be set to Enabled
AirGate Address (page 384) currently there is one AirGate server running at URL airgate.comap.cz (enter
this URL into the setpoint)
Connection using InteliConfig
Image 5.10 First screen of InteliConfig - select connect to controller
To Next Page
Loading...
