InteliLite Global Guide
726
Number of channels 1
Current
Range: 0 to 20 mA ± 0,33 mA
Resolution 10 bit
Analog outputs
Number of channels 8
Input resistance 4700 Ω
Input range 0 to 36 V DC
Switching voltage level for open contact
indication
0 to 2 V DC
Max voltage level for close contact indication 8 to 36 V DC
Binary inputs
Number of channels 8
Max current 500 mA
Max switching voltage 36 V DC
Number of channels 8
Voltage
Range 0-100 mV
Accuracy: 1,5 % ± 1 mV out of measured value
Current
Range: 0-20 mA
Accuracy: 2.5 % ± 0,5 ohm out of measured value
Resistive
Range: 0- 250 Ω
Accuracy: 1 % ± 2 ohm out of measured value
Binary outputs
Inteli AIN8TC
Inteli AIN8TC module is extension module equipped with 8 analog inputs dedicated for thermocouple sensors
only.
The detection of communication speed is indicated by fast flashing of status LED. Once the speed is detected
the module remains set for the speed even when the communication is lost. Renewal of communication speed
detection is done by reset of the module.
To Next Page
Loading...
Need help?
General
