ComAp IS-NT-BB

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
140
is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 2
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #2. Output from this channel
is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 3
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #3. Output from this channel
is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 4
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #4. Output from this channel
is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 5
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #5. Output from this channel