ComAp IS-NT-BB

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
141
is available in the combined output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 6
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #6. Output from this channel
is available in the combined output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 7
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #7. Output from this channel
is available in the combined output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 8
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #8. Output from this channel
is available in the combined output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 9
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #9. Output from this channel