ComAp IS-NT-BB

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
142
is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 10
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #10. Output from this channel
is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 11
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #11. Output from this channel
is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 12
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #12. Output from this channel
is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 13
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #13. Output from this channel