MainsPro, SW version 1.4, ©ComAp – January 2013
MainsPro Comprehensive Guide
Purpose of the MainsPro manuals
Installation and Operation Guide
The Installation and Operation Guide serves for the personnel providing installation of the MainsPro
unit. It contains wiring and setting instructions needed for service and commissioning of the unit. It
also contains introduction of the user interface and necessary procedures for setting and operation of
the unit. Though MainsPro is very simple and intuitive for the operating personnel, we recommend
keeping one copy of this manual available permanently at the site where MainsPro unit is installed, to
facilitate the necessary service and operation tasks.
Application Guide
The Application Guide serves for the designers and engineers, who process the necessary
documentation and implementation procedures on the site, where MainsPro is installed. It contains
detailed description of MainsPro functionalities and their practical application.
Reference Guide
The Reference Guide contains library of setpoints, inputs and outputs functionalities and detailed
technical information. This information is referenced in the Installation and Operation Guide and
Application Guide.
To Next Page
Loading...
Need help?
General
