EN
26
Warning
• This Comelit product has been designed and manufactured for use in the creation of audio and video communication systems in residential, commercial,
industrial and public buildings.
• All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the
indications provided in the manuals / instruction sheets supplied with those products.
• Disconnect the power supply before carrying out any operations on the wiring.
• Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
• We advise against running the system wires through the same duct as power cables (230V or higher).
• To ensure Comelit products are used safely: carefully observe the indications provided in the manuals / instruction sheets; make sure the system created
using Comelit products has not been tampered with / damaged.
• Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with the indications provided in
the manuals /instruction sheets. Any repairs must be carried out: for the products themselves, exclusively by Comelit Group S.p.A.; for the systems, by
qualified technical personnel.
• Comelit Group S.p.A. accepts no liability for any purpose other than the intended use, or failure to observe the indications and warnings contained in
this manual / instruction sheet. Comelit Group S.p.A. reserves the right to change the information provided in this manual / instruction sheet at any time
and without prior notice.
Table of contents
Description ................................................. 28
Device (see page 4) ......................................................... 28
Keypad .............................................................................28
Alphanumeric keypad ..................................................... 28
Connections ............................................... 29
Description of terminal block.........................................29
Technical specifications ........................... 30
Interface and navigation mode ................ 31
Description of the interface ........................................... 31
System status ....................................................................................... 31
Menu navigation .............................................................. 31
Use .............................................................. 32
U1 How to answer a call from an internal unit .....................................32
U2 How to answer a call from an external unit.....................................32
U3 How to call an internal unit .............................................................33
U4 How to transfer a call from the external unit to an internal unit ......33
U5 How to set up communication between 2 internal units (intercom
function) ......................................................................................... 34
U6 How to call an internal unit listed in the call queue ........................34
U7 How to use the name directory.......................................................35
U8 How to enter a name in the directory .............................................35
U9 How to find a name in the directory................................................35
U10 How to delete a name in the directory ..........................................35
U11 How to edit a contact in the directory ..........................................36
U12 How to use the lock-release .........................................................36
U13 Day/night operating mode ............................................................36
U14 How to activate the “Follow Me” function ....................................37
U15 Alarm indication ............................................................................ 37
U16 How to activate an additional relay Art. 1256 ...............................37
U17 How to call a secondary switchboard from a main switchboard..37
U18 How to call a main switchboard from a secondary switchboard..38
U19 How to answer a call made from the secondary switchboard to the
main switchboard .......................................................................38
U20 How to answer a call made from the main switchboard to the
secondary switchboard ..............................................................39
U21 How to activate (MASTER) or deactivate (SLAVE) the main
switchboards ...............................................................................39
Settings ...................................................... 40
Menu 1-7 screens tree diagram ...........................................................40
I1 Change time .....................................................................................41
I2 Change date ..................................................................................... 41
I3 Automatic day night .........................................................................41
I4 Recording speed numbers ...............................................................42
I5 Change language .............................................................................43
I6 Download names from PC ...............................................................43
I7 All names deleted ............................................................................. 43
Configurations ........................................... 44
Menu 8 screens tree diagram ............................................................... 44
C8.1 Video mode configuration ...........................................................45
C8.2 Calling mode ............................................................................... 45
C8.3 Type of switchboard (Simplebus Top mode) ...............................46
C8.4 Int. self act. on/o ....................................................................... 47
C8.5 Triple call on/o ..........................................................................47
To Next Page
Loading...
