Comelit 1998NA - I4 Recording Speed Numbers

EN
42
- press MENU and use the keys to view
the 3-DAY/NIGHT AUTOMATIC menu,
- press 3;
3-DAY/NIGHT
AUTOMATIC
- press 2-SET TIMES;
1-ON/OFF
2-SET TIMES
- 00:00 is the default time, the cursor will be
positioned on the first digit. Enter the time using the
alphanumeric keypad, moving the cursor using the
keys;
TIME 1:
00:00
- to confirm and move on to the next time, press OK
and repeat the procedure for all 4 times;
TIME 2:
00:00
- press ESC repeatedly to return to the main screen.
- press MENU and use the keys to view
the 3-DAY/NIGHT AUTOMATIC menu,
- press 3;
3-DAY NIGHT
AUTOMATIC
- use the key to view the 3-WEEK PROGRAM
menu, then press 3;
3-WEEK
PROGRAM
- press to select one of the 3 operating modes
(MODES: AUTO- DAY- NIGHT)
MONDAY
MODE: AUTO
MONDAY
MODE: DAY
MONDAY
MODE: NIGHT
- to confirm and move on to the next day, press OK
and repeat the procedure for all days of the week;
- to confirm, press OK;
- press ESC repeatedly to return to the main screen.
CAUTION! The days programmed to operate in
AUTO mode will all have the same time bands
set in section “I3.2 Setting times in auto mode”.
I3.2 Set times in auto mode
Speed numbers can be used to call an internal
extension directly by pressing the key associated
with the user address.
To store a speed number in the memory:
- press MENU and use the key to view the
4-RECORDING SPEED NUMBERS menu, then
press 4:
4-RECORDING SPEED
NUMBERS
- enter the code using the alphanumeric keypad
(default code 000):
SPEED NUMBER 01
CODE: 000
N.B. the CODE arrangement will be as follows:
- CODE (max. 3 digits): 000 for Simplebus system
- CODE (max. 3+3 digits): --- --- for Simplebus TOP
system
- CODE (max. 6 digits): ------ for Simplebus and
Simplebus TOP system with INDIRECT CODE
- to move on to the next speed number, press OK
and repeat the procedure;
- press ESC to return to the main screen.
I4 Recording speed numbers
I3.3 Programming the week