Comelit Vandalcom series User Manual

14
1.1.3. Call mode
There are 5 call management modes to choose from:
• Standard Simplebus (default),
• Simplebus Indirect code,
• Simplebus Top,
• Simplebus Top Indirect code,
• VIP
A. SIMPLEBUS - STANDARD call mode (default)
In this operating mode, the door-entry phone user is identified by a Code field no longer than 3 digits (between 1 and 240).
The call is made as follows:
1. On the keypad, enter the code 1
2. Press the key
» transmit the call to the user identified with the code 1
B. SIMPLEBUS - INDIRECT CODE call mode
In this operating mode, the door-entry phone user is identified by an Indirect Code field no longer than 6 digits and a
Code field no longer than 3 digits (between 1 and 240).
Example
User identified by Code = 1 and Indirect Code = 1000
The call is made as follows:
1. On the keypad, enter the code 1000
2. press the key
» transmit the call to the user identified with the code 1
C. SIMPLEBUS TOP call mode
In this operating mode, the door-entry phone user is identified by a 2-part Code field; a zone field with up to 3 digits
between 1 and 500) and a user field which must have 3 digits (between 1 and 240).
The call is made as follows:
1. On the keypad, enter the code 25 015
2. press the key
» call transmitted to the user identified with the code 25 015
D. SIMPLEBUS TOP – INDIRECT CODE call mode
In this operating mode, the door-entry phone user is identified by an Indirect Code field no longer than 6 digits and
a 2-part Code field; a zone field with up to 3 digits between 1 and 500) and a user field which must have 3 digits
(between 1 and 240).
Example
User identified by Code = 25 015 and Indirect Code = 1000
The call is made as follows:
1. On the keypad, enter the code 1000
2. press the key
.
» call transmitted to the user identified with the code 25 015
E. VIP call mode
In this operating mode the door-entry phone user is identified with a VIP address (max. 8 digits; for code self-
completion please refer to the technical manual for VIP Manager software).
Address entry on the speaker is managed using VIP Manager software.
The call is made as follows:
1. On the keypad, enter the code 56
2. press the key
» transmit the call to the user identified with the code 56

Comelit Vandalcom series Specifications

General

Brand	Comelit
Model	Vandalcom series
Category	Intercom System
Language	English