Comelit Vandalcom series User Manual

19
2.2. Password
2.2.1. Enter
2.2.2. Delete
The door lock relay on the speaker module can be activated by entering a password code stored previously (see “Opening the
door by entering the password code”)
PROCEDURE DISPLAY INFO DESCRIPTION
Access configuration (see “Accessing/
exiting the configuration stage”)
Select the ACCESS CONTROL /
PASSWORD / ENTER using the key
.
MAIN
ACCESS CONTROL
ACCESS CONTROL
PASSWORD
PASSWORD
ENTER
The menus are scrolled through
automatically every 2 seconds.
Enter the desired password code.
PASSWORD
VALUE: _ _ _ _ _ _
PASSWORD
VALUE: * * * * * *
The password must be at least 4 digits
long. If the password is 4-5 characters
long, it will self-complete: the first digits
will be zero (e.g.: 001234 / 012345).
Press the
key to confirm the value
of the parameter.
To exit the menu, press
.
PARAMETER
CHANGED
If entry is successful.
Up to 1000 password codes can be
entered.
or:
PASSWORD ALREADY
IN MEMORY
If the password has already been
entered.
Exit configuration (see “Accessing/
exiting the configuration stage”)
PROCEDURE DISPLAY INFO DESCRIPTION
Access configuration (see “Accessing/
exiting the configuration stage”)
Select the menu ACCESS CONTROL /
PASSWORD / DELETE using the key
ACCESS CONTROL
PASSWORD
PASSWORD
DELETE
The menus are scrolled through
automatically every 2 seconds.
Enter the desired password code.
PASSWORD
VALUE: _ _ _ _ _ _
PASSWORD
VALUE: * * * * * *
Enter the exact password (the first two
digits, if omitted, will be entered as zero).
Press the
key to confirm deletion.
To exit the menu, press
.
PARAMETER
CHANGED
If entry is successful.
or:
WRONG
PASSWORD
If the password is not recognised.
Exit configuration (see “Accessing/
exiting the configuration stage”)

Comelit Vandalcom series Specifications

General

Brand	Comelit
Model	Vandalcom series
Category	Intercom System
Language	English