COMGROW COMGO Z1 User Manual

1819
1.Laser Grbl Tutorial(Window)
Software Installation Guide
5.Select the engraving mode and click "Next".
(It is recommended that you select the horizontal
engraving mode).
6.Select carving parameters (M3 for constant power
carving,M4 for variable power).
1.Laser Grbl Tutorial(Window)
3.Link the USB cable and turn on the machine, then
click“Connect“.
4.Click "Open File" to select the engraving file.
Software Installation Guide

COMGROW COMGO Z1 Specifications

General

Brand	COMGROW
Model	COMGO Z1
Category	Engraver
Language	English