0203
Cautions
1. The COMGO Z1 Laser Engraver is for indoor use only and you must be 18 years of age or above
to operate this machine.
2. Please wear appropriate protective equipment when you are operating the equipment (e.g.
laser protection glasses, etc.)
3. Please place the machine in a horizontal position before use.
4. COMGO Z1 Laser Engraver provides switchable power supply 230V AC or 110V AC with 24V
output voltage, it is forbidden to use other power supplies or laser modules, which may lead to
machine failure or damage.
5. Do not disassemble the power supply or electrical parts. This will void the warranty.
6. Laser cutting different materials will produce different levels of smoke, please place the ma-
chine in a well-ventilated area and use it under supervision.
7. Please maintain the laser module regularly to ensure the life of the laser module.
Paramenters
Machine Size
Working Area
Frame Material
Stepper Motor
Laser module type
Wavelength
Compatible Software
Compatible System
Input Voltage
Laser Power
Focal Length
S-value Range
Connection Method
Engraving Accuracy
Machine Weight
575*575*205mm/22.64*22.64*8.07inch
400*400mm/15.75*15.75 inch
5.0 KG/11lbs
Aluminum
42mm*42mm*34mm
Diode lasers
445nm
LaserGRBL：Windows XP、Windows7、
Windows8、Windows10
Lightburn：Windows、Mac OS and Linux
Laser GRBL、Lightburn
AC110V-230V
1.6W/5W/10W
1.6W:30-100mm 5W:23mm 10W:45mm
S0-S1000（0%-100%）
USB
0.1mm
NOTE:the focal length is the distance from the lower face of the laser module profile to the engraving plane.
To Next Page
Loading...
Need help?
General
