Comm-Tec UP-51TS - Page 24

Compact Scaler Switcher
Comm-Tec S.r.l. 24 www.comm-tec.it
Command
Function
Feedback Example
50767%
Restore default EDID
EDID: initial
50768%
Bypass EDID data from output to input
EDID: bypass
50769%
Upload custom EDID data to the
switcher
EDID: user
50770%
Inquire EDID status
EDID: initial
EDID: bypass
EDID: user
50782%
EDID management, copy the best
resolution data of one output to HDMI
input
EDID manage
Resolution:1920x1080
50787%
Enable serial control mode 1: control
Scaler & far-end from local RS232
RS232 Mode 1: RS232 Control
Scaler & Remote
50788%
Enable serial control mode 2: control
Scaler from local RS232 and far-end)
RS232 Mode 2: RS232 Control
Scaler
50714%
Auto Switch Mode: Disable the
automatic power off function
Auto Switch Mode: Set no input
to power off function: Disable
50715%
Auto Switch Mode: Set the automatic
power off time to 1 minute for No
signal input
Auto Switch Mode: Set no input
to power off time: 1 minute
50716%
Auto Switch Mode: Set the automatic
power off time to 2 minutes for No
signal input
Auto Switch Mode: Set no input
to power off time: 2 minutes
50717%
Auto Switch Mode: Set the automatic
power off time to 5 minutes for No
signal input
Auto Switch Mode: Set no input
to power off time: 5 minutes
50718%
Auto Switch Mode: Set the automatic
power off time to 10 minutes for No
signal input
Auto Switch Mode: Set no input
to power off time: 10 minutes
50719%
Check the automatic power off time
Auto Switch Mode: Set no input
to power off time: 1 minutes
Manual Switch Mode: Set no
input to power off function:
Disable