Comm-Tec UP-51TS - Page 25

Compact Scaler Switcher
Comm-Tec S.r.l. 25 www.comm-tec.it
Command
Function
Feedback Example
50740%
Manual Switch Mode: Disable
automatic power off function
Manual Switch Mode: Set no
input to power off time: 0
minutes
50741%
Manual Switch Mode: Set the power
off time to 1 minute
Manual Switch Mode: Set no
input to power off time: 1 minute
50742%
Manual Switch Mode: Set the power
off time to 2 minute
Manual Switch Mode: Set no
input to power off time: 2
minutes
50743%
Manual Switch Mode: Set the power
off time to 5 minute
Manual Switch Mode: Set no
input to power off time: 5
minutes
50744%
Manual Switch Mode: Set the power
off time to 10 minute
Manual Switch Mode: Set no
input to power off time: 10
minutes
50697%
Exit standby mode
Wake up!
50797%
Enter standby mode
Go to standby!
50698%
Software update
Software update
50617%
Reset to factory defaults
Factory Reset
Menu Commands
50609%
OK for OSD selection
Key: ok
50610%
LEFT button
Key: left
50611%
RIGHT button
Key: right
50612%
UP button
Key: up
50613%
DOWN button
Key: down
50616%
MENU button (enter OSD)
OSD: Enter
50618%
EXIT button (exit OSD)
OSD: Exit
Inquire Commands
50630%
Check the volume level
Source Volume: xx (xx=00~60)
MIC Volume: xx (xx=00~60)
50631%
Check the input source
Input: xx (xx= HDMI1/ HDMI2/
HDMI3/ DP/ VGA/ YPbPr/ AV)
50632%
Check the output resolution
Resolution: xx (xx=1920×1200/
1920×1080/ 1600×1200/