16
* As a common wiring type product, damage may result if the installed Household
videophone unit is removed and installed at a different location.
* Please turn the unit ON.
* When damage or malfunction of the unit has been detected, please contact the
Customer Service Center right away.
* An appropriate circuit breaker must be installed in the building's interior wiring.
* Do not place vase, water bottles, and etc on top of the unit.
* Please ensure that electrical power has been completed blocked from the unit when
installing or repairing the unit.
22. Instruction for use
▶ When more than one videophone is connected to the system and one of those
videophones are in use, the call cannot be made by another videophone within that
system.
▶ Also, incoming pages while a call is being made are only heard through the
videophone in which that call is being held from.
▶ When an emergency situation occurs, emergency alarm will be sounded by all
installed videophones, and the Cancel/Reset feature can only be performed through
videophones supporting that feature.
▶ This videophone is able to call the guard, wireless phone(ext. 5) and Master
phone(ext. 1) but in other places (common entrance, other households, local loop
and so on), only receiving is available.(Master interlocking function)
Monitor
T4 X 18
Wall bracket
Mounting Screw
M3 X 8
Monitor
Fixing Screw
Connector
(7P X 1EA)
Adapter
(DC 14V)
Bracket for wall mount Manual
23. Contents
POWER CORD
16
16
26
Wi-Fi Connection
Setting → Wi-Fi
You can search for nearby wireless networks and select the wireless network you want to connect to.
Select the Wi-Fi you want from the list of automatically discovered wireless networks, enter your password if
necessary, and tap Connect. If you have secured Wi-Fi with a padlock, you'll need to enter your password before
you can use it.
Add Wi-Fi manually
If the Wi-Fi you want does not appear in the list, you can enter your Wi-Fi information and add it to the list.
Click the "+" button at the top of the Wi-Fi list to select Add Wi-Fi networks.
Enter the network SSID and select the security type to enter the password or select the EAP method and click
Connect. The information depends on the type of security you choose.
Disconnect Wi-Fi
You can reset the network information that was previously connected or currently connected so that it is not
automatically connected. Select the currently connected Wi-Fi and tap Do not save. The Wi-Fi connection is lost
and the previous connection information is initialized.
8.6. Screen setting
Setting the screen brightness
Settings → Display → Brightness
1) Press Brightness.
2) The brightness window is displayed on the screen.
3) Use the left and right scrolls to adjust the brightness.
4) ‘Click the 'OK' button to save the settings.
Setting the screen auto-off time
Settings → Display → Power saving Mode
1) Press Power Saving Mode.
2) A list of screen time limit is displayed.
3) Press the desired time to save the setting. If you press 'Cancel' button, it is not set.
8.7. Language and key setting
Change language
Settings → Language and Keyboard → Language
You can set the language displayed on your device.
1) Click Language.
2) Select the language to set in the list.
To Next Page
Loading...
Need help?
General
