AMIGA 1000 ASSEMBLY LEVEL REPAIR
NOTE: At present, the best procedure to check a keyboard
is by using NOTEPAD. If additional help is needed to
load NOTEPAD refer to 1.6 SYSTEM DISK TEST and
1.7 SYSTEM PCB TEST.
1.11 KEYBOARD TEST
1.11.1 Insert KICKSTART disk when prompt appears.
1.11.2 Insert WORKBENCH disk when prompt appears.
1.11.3 Select WORKBENCH disk ICON.
1.11.4 Select UTILITIES DRAWER from WORKBENCH WINDOW.
1.11.5 Select NOTEPAD from UTILITIES WINDOW. Wait for the NOTEPAD to turn white before
beginning keyboard test.
1.11.6 Hit every key to verify proper operation. Function keys appear on the screen as ~ .
1.11.7 Check the LED operation on the CAPS LOCK key.
• If any key operation is INCORRECT, EXCHANGE KEYBOARD and RETRY.
• If all key operations are CORRECT, KEYBOARD should be considered GOOD.
1-16
To Next Page
Loading...
