Commodore PC 10 - Page 397

Appendix C Instal/able Device Drivers 2591
CUB.....,... Cursor Backward
ESC [PnD
This escape sequence moves the cursor back one column without
changing lines. The value of Pn sets the number of columns
moved.
The default value is 1. If the cursor is already in the far
left column,
MS-DOS ignores the CUB sequence.
DSR - Device Status Report
ESC[6n
The console driver outputs an RCP sequence when it receives the
DSR escape sequence.
SCP - Save Cursor Position
ESC [s
The console driver saves the current cursor position. This position
can be restored by the RCP sequence.
RCP - Restore Cursor Position
ESC [u
This sequence restores the cursor position to the value it had
when the console driver received the SCP sequence.
Erase Functions
The following escape sequences affect erase functions.
ED - Erase Display
ESC[2)
The ED sequence erases the screen. The cursor then goes to the
home position.
EL - Erase Line
ESC [ K
This sequence erases from the cursor to the end of the line
(induding the cursor position).
Affecting Erase
Functions