Commodore PC 10 - Page 441

[
[
[
[~
[~
Read error in filename
[Edlin][Find]
• MS-DOS could not read the entire file.
Read fault error reading drive x:
[MS-DOS]
• This is a device error. See Appendix D, "Disk and Device
Errors. "
Reading source file(s) ...
[Xcopy]
• Xcopy is now reading the source files that you specified
Reinsert diskette for drive x:
[Format]
• Reinsert the disk being formatted in the indicated drive.
Replace filename? (YIN)
[Replace]
• Replace displays this prompt if you specify the Iw switch.
Press Y if you want to replace the existing file, or N if you do
not want to replace the file_
Replacing filename
[Replace]
• Replace displays this prompt to let you know that it is replac-
ing this file that exists on your disk
Requested Screen Shift out of range
[Mode]
• You cannot shift the display any farther.
Resident part of PRINT installed
[Print]
• This is the first message that MS-DOS displays when you issue
the Print
command It means that to process the Print com-
mand with other processes, available memory has been
reduced
by several thousand bytes.
Resident portion of MODE loaded
[Mode]
• Part of the Mode program is now resident in memory, and
available memory has been reduced by several thousand bytes.
P-R 303
R