CommScope Touchstone DG6450 User Manual

Both
If you have mulple computers, you can use Ethernet for up to two devices and wireless for
the others. To connect three or more computers to the Ethernet ports, you will need an
Ethernet hub (available at computer retailers.)
Get support
If you need assistance with your ARRIS product please contact your service provider.
For addional technical informaon and product user guides please visit the ARRIS Support
website at hp://www.arris.com/consumers.
Install and connect your DG6450
Before you start, make sure that:
■ You have all the Items you need (page 9).
■ Cable and power outlets are available near the computer. If a cable outlet is not
conveniently located, your service provider can install a new one.
If you have ordered service, your service provider should congure the DG6450
automacally. You need only follow the instrucons in this secon to install and connect the
DG6450.
Front panel
The front of the DG6450 has the following indicators.
Chapter 2: Get started
Touchstone DG6450 Data Gateway User Guide DRAFT Revision 2.5 14

CommScope Touchstone DG6450 Specifications

General

Brand	CommScope
Model	Touchstone DG6450
Category	Gateway
Language	English