SinoGNSS G100/G200 User Guide
11
3.1.2 Start a New Project
Click Project to build a new project, select predefined (or add the user defined)
coordinate system.
3.1.3 Bluetooth Connection
Switch to the Device interface, click Connection -> choose the serial number of the
receiver and allow PAIR to complete the connection.
3.1.3 PDA CORS Mode
Switch to the Device interface, click QuickSetup -> go to Rover, select “+” -> PDA
CORS mode, you should enter the static CORS server IP and Port, also enter your
To Next Page
Loading...
Need help?
General
