SinoGNSS G100/G200 User Guide
13
3.1.5 Stake out a point
Click Stake point in survey interface -> Choose point and click stake. You also can
Enter or Import points for staking.
3.1.6 PPK survey
PPK (post processing kinetic) is the unique function of survey master, which is used
for post-processing dynamic measurements.
It needs two receivers to work together, one work as Base to record static data,
usually set sample 1Hz; and another one work as Rover as shown below, usually
measure 10s for one point.
To Next Page
Loading...
Need help?
General
