ComNav Technology G100 - GIS Data Collection with G100;G200; Outputting NMEA Data with CRU Software

SinoGNSS G100/G200 User Guide
20
4 GIS Data Collection with G100
G100 receiver is designed for GIS application while G200 receiver is designed for RTK,
but G200 can also work in GIS application.
G100/G200 can work fluently with third-party GIS software, this section take
Collector for ArcGIS for example.
4.1 Output NMEA data
Firstly, please visit ComNav Technology website to access CRU software:
http://comnavtech.com/download.asp?bigclassid=28
 Connect receiver to PC with DB9 cable, run the CRU software.
 Click “Set Port”, select the correct COM port and Baud Rate, then click “OK”.
Usually the Baud Rate of the port is 115200.
Click “Command”, send the command “log version”.