Como Open Therm User Manual

Part 1: Operation
10
T-OUTSIDE
(only with outdoor sensor connected [Terminals 5+6]) Display of the current outside
temperature [°C / °F] Ä => Max. value with time;
=> Min value with time;
=> Max. value with time; Ä => RETURN
T-ROOM DES
Display of the current room temperature [°C / °F]
Ä => Current set temperature;
=> Min value with time; => Max value with time;
Ä => RETURN
T-DHW
Display of the current hot water temperature [°C / °F] (only in hot water tank mode)
Ä => Current set temperature; Ä => RETURN
T-HS
Display of the current boiler temperature [°C / °F] Ä => Current set temperature; Ä =>
RETURN
T-FLOW
Only with 2nd heating circuit: Displays the current flow temperature of the 2nd heating cir-
cuit [°C / °F] Ä => calculated value; Ä => RETURN
MODULATION
Display of the current boiler output [%]; 00 = OF or value is not being sent
BURNER TIME
Display of the current burner operating hours [h] Ä => Set value to ZERO; Ä => RETURN
BURNER START
Display of the current burner start of the boiler [x] Ä => Set value to ZERO; Ä =>
RETURN
WATER PRESS
Display of the current water pressure in the boiler (0.0 => value is not being sent)
RETURN Ä =>RETURN to main menu
Overview of display messages
DISPLAY

T-OUTSIDE

T-ROOM DES

T-DHW

T-HS

T-FLOW

MODULATION

BURNER TIME

BURNER START

WATER PRESS

RETURN

Como Open Therm Specifications

General

Brand	Como
Model	Open Therm
Category	Temperature Controller
Language	English