Part 1: Operation Changing the settings
7
Changing the settings
Changing the settings
Ä Programming key
a) Select a value level
b) Select a value to be changed
c) Saving the new value
Plus key
(Search for or change value)
Minus key
(Search for or change value)
Operating and changing modes are accessed
directly by opening the control panel cover. =>
USER in the display
/ Use the Plus/Minus keys to select the level in
which the value to be changed is located
=> Overview on the following pages
Ä Press the Prog key => Open / Select the level
/ Use the Plus/Minus keys to locate the value
=> Overview on the following pages
Ä Press the Prog key => Select the value
Warning triangle appears in the display
=> Value can be changed
/ Use the Plus/Minus keys to change the value
either
=> Do not save the value
ò Close the control panel cover =>
E Caution! The changed value is not saved.
or
=> Save the value
Ä Press the Prog key => Value is saved
Warning triangle disappears from the display and
then
ò Close the control panel cover
~
To Next Page
Loading...
Need help?
General