Part 1: Operation
12
Enter heating programs
F
2
D
D
I
F
2
B
D
I
Symbols:
I ON = First switch-on time (I OFF = first switch-off time)
20 °C/ 68°F = Set room temperature for displayed heating
time
Clock = Approximate program display [full hours]
D = Program for heating circuit 1
F
2
= Heating program 2, F
1
= Heating program 1
DI = Start time 1, IB = Stop time 1, DII = Start time 2,
IIB = Stop time 2, DIII = Start time 3, IIIB = Stop time 3
Timer/heating program adjustment
/ Select weekday (Mo-Su) or block
(MO-FR => Monday-Friday, SA-SU => Saturday-Sunday,
MO-SU => Monday-Sunday)
Ä Open weekday/block (see left)
=> "I ON 20°C/ 68°F " First switch-on time – set value I =
20°C/ 68°F
Set first switch-on time => for example 6:00 hrs
Ä Confirm first switch-on time
=> "I OFF 20°C/ 68°F " First switch-off time – set value I
= 20°C/ 68°F
Set first switch-off time => for example 8:00 hrs
Ä Confirm first switch-off time
=> "II ON 20°C/ 68°F " First switch-off time – set value II
= 20°C/ 68°F
/ / Ä Switch-on and switch-off times 2 and 3 are en-
tered in the same way - please enter all values!
/ Select another weekday/block for entry or exit heat-
ing program 2 with "RETURN" and set another program.
! The heating times are not saved until all the times
for a weekday/block have been entered.
"- - - -" for a switch-on/switch-off time => The relevant
heating timer is deactivated.
ION
IOFF
To Next Page
Loading...
Need help?
General