Part 1: Operation
14
~ OPEN cover Ä change value with /
Enter holiday program
For the holiday program, the following are entered in
days:
• the start of the holiday
• the duration of the holiday
HOLIDAY
StART-HOLID
HOLIDAY DUR
Operating and changing modes are accessed
directly by opening the control panel cover. =>
USER in the display
6x Plus key => Display:
"HOLIDAY" and "remaining days, e.g. 00"
Ä Prog key => Display: "SART HOLID" and "E"
/ Enter the number of days in which the holiday
starts.
The start is always assumed at 12:00 pm
! Please do not enter the day of travel as the start
date, but the first day of the holiday (no more
heating from this day)
Ä Prog key => Display: „ HOLIDAY DUR “and „E“
/ Enter the duration of the holiday in days
The end is always assumed at 12:00 pm
! Duration without days of travel. At days of travel you
should keep heating on
End the holiday programming function => " " Press Mode selector switch.
~
To Next Page
Loading...