EasyManua.ls Logo

Compaq CONTURA AERO - Keyboard Test Error Codes

Compaq CONTURA AERO
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Replace the system board and
retest.
---------------------------------------------------------------------------
203 - xx Memory write/read test The following steps apply to
failed 203 - xx through 211 - xx error
codes:
204 - xx Memory address test
failed If you don't have a memory expansion
board, replace the system board.
210 - xx Increment pattern test
failed If you have a memory expansion
board:
211 - xx Random pattern test
failed Replace the memory expansion board
and retest (Figure 5-1).
===========================================================================
Table 5-4. Keyboard Test Error Codes
===========================================================================
Error Code Description Recommended Action
===========================================================================
301 - xx Keyboard short test The following steps apply to
8042 self test failed 301 - xx through 304 - xx error
codes:
302 - xx Keyboard long test
failed 1. Check the keyboard connection.
If an external keyboard is
303 - xx Keyboard LED test, disconnected, turn off the
8042 self test failed computer and connect the
keyboard.
304 - xx Keyboard typematic 2. Replace the keyboard and retest.
test failed 3. Replace the system board and
retest.
===========================================================================
Table 5-5. Parallel Printer Test Error Codes
===========================================================================
Error Code Description Recommended Action
===========================================================================
401 - xx Printer failed or not The following steps apply to
connected 401 - xx through 498 - xx error
codes:
402 - xx Printer data register
failed 1. Connect the printer.
2. Check the power to the printer.
403 - xx Printer pattern test 3. Install the loopback connector
failed and retest.
4. Replace the printer cable and
498 - xx Printer failed or not retest.
connected 5. Replace the system board.
===========================================================================
Table 5-6. PCMCIA External Diskette Drive Test
===========================================================================
Error Code Description Recommended Action
===========================================================================
600 - xx Diskette ID drive types The following steps apply to
test failed 600 - xx through 698 - xx error
codes:
601 - xx Diskette format failed 1. Replace the diskette and retest.

Related product manuals