Probable Cause: System, ROM checksum error
Recommended Action: 1. Verify the correct ROM.
2. Replace the system board.
---------------------------------------------------------------------------
Message: 101 ROM Error
Beeps: 1 Long, 1 Short (Beeps can be disabled by the user from
the Computer Setup utility.
Probable Cause: Second system ROM does not pass the checksum
Recommended Action: 1. Verify the correct ROM.
2. Replace the system board.
---------------------------------------------------------------------------
Message: 101 ROM Error
Beeps: 1 Long, 1 Short (Beeps can be disabled by the user from
the Computer Setup utility.
Probable Cause: Option ROM does not pass the checksum
Recommended Action: 1. Verify the correct ROM.
2. Remove PCMCIA card and retest.
3. Replace the system board.
---------------------------------------------------------------------------
Message: 102 System Board Failure
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: System Board
Recommended Action: Replace the system board.
---------------------------------------------------------------------------
Message: 102 System Board Failure
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Counter zero check failed
Recommended Action: Replace the system board.
---------------------------------------------------------------------------
Message: 102 System Board Failure
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Refresh bit does not toggle
Recommended Action: Replace the system board.
---------------------------------------------------------------------------
Message: 102 System Board Failure
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: CMOS read/write failed
To Next Page
Loading...
Need help?
General